Accessories & Options
 |
9.6-18 volt smart charger. Automatically detects battery voltage and peak charges NiCad and NiMh batteries at a 0.9 amp or 1.8 amp rate. For use with MMP-5 and MMP-8 robot platforms. | $46.99 |
 |
19.2-24 volt smart charger. Automatically detects battery voltage and peak charges NiCad and NiMh batteries at a 1.5 amp rate. For use with MMP-30 and MMP-40 robot platforms. | $65.99 |
 |
The RS-232 adaptor board
provides voltage shifting and opto-isolation with a DB-9 connector if
you plan to run your MMP robot directly with a computer that utilizes
the standard +- 5V and +-12V voltage translation.
You only need one RS-232 board to communicate with a serial MMP platform |
$34.95 ea. |
 |
MMP-5 PVC prototyping plate with sensor bumper. Great for mounting electronics, sensors, extra batteries and servos. Comes with 4 nylon 4-40 standoffs. Click here for mounting hole distances. Holes can be pre drilled and tapped if you specify when ordering at no charge. | $13.95 |
 |
MMP-8 dual PVC prototyping plate with sensor bumpers. Great for mounting electronics, sensors, extra batteries and servos. Comes with 4 nylon 4-40 standoffs. Click here for mounting hole distances. Holes can be pre drilled and tapped if you specify when ordering at no charge. | $15.95 |
 |
Base loaded antenna mount. This delrin mount keeps the antenna isolated from the aluminum chassis. The mount requires a 3/4 hole to be bored in the aluminum chassis with a three hole bolt circle. This can be done free of charge if you specify when ordering. Comes with 3, 2-56 screws. | $3.95 |
 |
Deans base loaded antenna for use with R/C receivers. This replaces the standard 37 inch antenna wire that comes with the receivers. | $10.95 |
 |
Geolander tires for indoor/outdoor use. Great
for loose dirt, rocks, sand, grass etc.
This tire comes standard with the MMP-5 and MMP-8 platforms unless otherwise stated.
|
Extra pair: $16.99 |
 |
F5 wheels with 12mm hex drive. | Extra pair: $12.49 |